Thanks Myron. That was my guess. Just wanted some expert advice before I
dug into it.
--- In Honda-C70@yahoogroups.com, myron andrews <mvandrews13@...> wrote:
>
>
> Rich : The bolt in the middle of the fined cover on the right side
goes all the way through the cam & cam gear to hold the cam gear cover
on the left side. It`s a long bolt. Good Luck ! Baby Huey Ps you don`t
need to remove the other 2 bolts on the right side plate.
>
>
>
>
> To: Honda-C70@yahoogroups.com
> From: sophiascoot@...
> Date: Tue, 4 Oct 2011 10:00:55 +0000
> Subject: [Honda-C70] Head removal
>
>
>
>
>
>
> Ok, i've checked my manual and need some help. Where is the bolt that
holds the dome cover over the cam gear? Manual says on right side. I see
one bolt and two screw that deal with ricker arms. A little guidance
would help. Thanks in advance. A pix would be great.
> Rich
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
1970-73 C70 Honda Service Manual: http://tinyurl.com/6ebwtw
1970-73 C70 Troubleshooting Guide:
http://tinyurl.com/6ebwtw (scroll to sec.7.1 page 101.jpg)
1980-83 C70 Honda Service Manual: http://tinyurl.com/hu42c
1980-81 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec.18-1 page 170.jpg)
1982-83 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec. 20-28 page 205.jpg)
1980-81 C70 Maintenance Schedule: http://tinyurl.com/z4zn6
1982-83 C70 Maintenance Schedule: http://tinyurl.com/hw35c
More resources for C70 Passports and Cubs:
http://www.shlaes.com/Vehicles/Scooter.htm
http://www.velodrome.com/HondaC70/HondaC70.html
